King of Jeers

Bottling day!

I noticed a few days ago that the airlock has receded, which indicates to me little activity and otherwise ready to bottle.  So I gently (as much I can with such a heavy carboy) moved the brew to the top of the dishwasher.  Meanwhile, I also sanitized and set to dry the bottles (and beaker) I will need.

Next up…sanitize and rinse the primary fermentor, as I will need to cook up a sugar mixture and stir it in (and since the carboy has sediment, stirring that would be a bad idea).  Once boiled, I added the sugar mixture to the bucket, and set up the siphon.

While that was happening, I filled the beaker with the beer (from the siphon) and tested the specific gravity (to also gain an alcohol content).  Started at 1.035, now 1.010 which converts (4.5 – 1.3) to 3.2%?  I guess I will use the content noted on the box (4.8%), since I did not alter the recipe.

Once the carboy is empty, I will drop that to the floor, and then stir and plunk the bucket where the carboy was, and reset the siphon hose for the bucket.  I don’t have pictures for this part, as it is quite time sensitive, but I am now filling the bottles, capping them, and adding them to the crates.

Finally, after quite a bit of cleanup, I can add the labels (encountered a printer alignment problem so I will have to finish the labels at a later point).

Jpeg

Advertisements
King of Jeers

4 thoughts on “King of Jeers

    1. I am wondering if there is a failure with my hydrometer, as it has been reading low alcohol contents for a long time (maybe since I broke my last one and started using this one). My wine (bottled a week later) added up to 8.8% alcohol (when previous batches several years ago with the same recipe would yield ~12%). Makes me wonder…

      Liked by 1 person

      1. Definitely possible. I’ve had more than one hydrometer where the inset slipped, and suddenly everything I was making was off. Its easy enough to test. Fill your hydrometer test jar up with cold-medium tap water(hopefully somewhere around 60 degrees, or at least within 5 degrees of it). Place your hydrometer in it. You should be somewhere around 0.000, at least within .002 points of it. If not, hydrometer is probably busted.

        Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s